Product Selection Guide

Fire and Gas Products

Onguard Model 800 Fire / Gas Control Panel

The Onguard model 800 is a modular 19” rack or panel mount fire-gas control panel that is field hardwired. There are various initiating and appliance driving modules that slide into the rack housing to accommodate different installation requirements. Three-gang, wall mounted abort modules with digital displays are available. This panel is approved for releasing. The control panel is designed to be powered by customer’s 24VDC redundant power source.

Onguard Model FG8800 Fire / Gas Control Panel

The Onguard FG8800 is an Industrial, commercial, touch-screen, 19” rack or panel mount fire-gas control panel that is addressable and communicates to nodes in the field. Each addressable field node is capable of accommodating up to 4 channels. The control panel is designed to be powered by customer’s 24VDC redundant power source. The four field node descriptions are as follows:

The Input node accepts dry contacts from initiating devices. The 4-20mA node accepts industrial standard gas detectors. The supervised output module powers output appliances like bells, horns and strobes. The relay module provides 4, 10amp dry relay contacts for ancillary devices. This panel is approved for releasing. The class A or B bus configuration is selectable at the panel.

Edison Temperature Monitors

Edison Onguard Model 1616 RTD-Thermocouple Temperature Monitor

The Edison model 1616 is an addressable, high quality temperature monitor primarily designed for motor protection but can be utilized anywhere there is the threat of temperature damage to equipment. A bright 4 line X 20 character VFD display details alarm conditions. The monitor is panel mounted and IP66 rated for the front bezel assembly. Up to 16 RTD-T/C transmitters are bussed on a communication wire to communicate to the monitor. Provisions to print configurations and reports are provided through a USB thumb drive port.

Edison Onguard Model 1604 RTD-Temperature Monitor

Onguard Portable Inspection Lamps

Onguard Model 2020-38 Industrial-Commercial Inspection Magnifying Lamps

The Onguard inspection lamp utilizes an 18 watt fluorescent lamp to provide light for magnifying objects. The lamp is a portable housing design and allows the top magnifying section to release from the battery below for flexibility. The lamp has the option to be connected to a car’s 12VDC auxiliary power outlet. The lamp can be set on a table in various positions to also be used as a fixed inspection source.

 

Copyright © 2024 Allestec Corporation. All rights reserved.